Indoor Console - Stages SIC2 Console User Guide

Button Brightness

The LED button brightness can be adjusted in increments of 10 percent,
from 10-90%. To adjust the brightness of the LED buttons (RIDE, STAGE, and END):

  1. Activate the console by pressing any button, then press and hold the RIDE and END buttons for 3 seconds to bring up the Settings menu.
  2. From the Settings menu, use the RIDE and END buttons to scroll, and the STAGE button to select Display.
  3. From the Display menu, select Btn LEDs.
    Display menu with Button LEDS highlighted
  4. Use the RIDE and END buttons to reduce or increase the brightness of the RIDE, STAGE, and END buttons.
    Console with 'buttons' displayed beside up/down arrows, and '90 percent' displayed center.
  5. Press STAGE to set the button brightness and then press STAGE again to confirm the setting.
  6. Select Back to exit the Display menu and Exit to exit the Settings menu.