Indoor Console - Stages SIC2 Console User Guide

Battery Levels

Battery level menu with console, power, and heart rate battery levels

The Battery Level page allows you to check the battery levels of the console and any connected sensors, such as power, cadence, heart rate, or gears. Along with this, the Battery Level page allows access to the Fast Charge RPM and Wall Charge features.

The console battery level is also displayed in the top right corner of the screen during startup and rides. Sensor battery levels will also appear on-screen when a sensor has a battery level of less than 20%.

Battery Level Key
Full 67+% Full battery LED icon.
OK 34-66% Half-full battery LED icon.
Low 0-33% Low battery LED icon.

To check the battery level for your console or sensor:

  1. Activate the console by pressing any button, then press and hold the RIDE and END buttons for 3 seconds to bring up the Settings menu.
  2. From the Settings menu, use the RIDE and END buttons to scroll, and the STAGE button to select System.
  3. From the System menu, select Battery.

Fast Charge RPM

Screen displays Battery Levels menu with "Fast Charge RPM" highlighted

The Fast Charge RPM feature enables selecting the minimum RPM that will put the console into a fast/high battery charge state.

Screen reads "Fast Charge Min RPM' with 40 RPM highlighted

40 RPM is the default RPM setting, but if you experience flickering lights or dimming screens when riding at lower RPMs, adjust to the 60 RPM setting.

Wall Charge

Screen displays Battery Levels menu with "Wall Charge" highlighted

The Wall Charge feature allows the console battery to be charged with a wall charger. Use this setting if you have been provided a wall charger by Stages.

SEARCH RESULTS FOR:

"term"