Indoor Console - Stages SIC1 Console User Guide

Heart Rate Sensor

To link a heart rate sensor:

Follow the manufacturer’s instructions to use your ANT+ or Bluetooth-compatible heart rate sensor.

1. Put on the heart rate sensor and position yourself near the console. You must be within 12 inches (30 centimeters) of the console to link a heart rate sensor.

2. Press any button to activate the console, then press the STAGE button to enter the WARM UP mode.

Note: The console must be in the WARM UP mode to link to a compatible heart rate sensor. The heart rate sensor cannot link to the console when the console is in the STAGE mode.

3. Link the heart rate sensor to the console.

The heart symbol will flash in the heart rate display and the console will show heart rate data.

Note: After the heart rate sensor is linked to the console, the console will be able to receive heart rate signals within an area encompassing all the riding positions of the exercise bike.