The console has an Auto Pause function that allows you to stop your ride temporarily and then resume your ride without affecting the average value data shown and saved by the console. The console will enter the AUTO PAUSE mode when your pedaling cadence is less than 20 RPM for 30 or more seconds.
Note: The console will not enter the AUTO PAUSE mode when riding in WARM UP mode.
When the console enters AUTO PAUSE mode, a pause symbol will appear in the message banner. The time display will pause and the left displays will not show instantaneous data.
The console will exit the AUTO PAUSE mode and return to the current stage if the console detects a pedaling cadence greater than 20 RPM within the first 5 minutes of AUTO PAUSE mode.
The console will exit the AUTO PAUSE mode and enter the SLEEP Mode if no pedaling cadence greater than 20 RPM is detected after 5 minutes.
To enable or disable Auto Pause, see Auto Pause settings.
The console has an AUTO PAUSE OFF option designed to be used by studio cycling class instructors.
Since most studio cycling classes must be completed in a set period of time, instructors may not want the console to pause the time when they stop pedaling or get off their exercise bikes for short periods of time.
When the AUTO PAUSE OFF is selected, a pause symbol will appear in the message banner when the console detects a pedaling cadence of less than 20 RPM for 30 or more seconds; however, the time display will not pause.
The console will exit the AUTO PAUSE OFF mode and return to the current stage if the console detects a pedaling cadence greater than 20 RPM during the first 10 minutes of the AUTO PAUSE OFF mode.
The console will exit the AUTO PAUSE OFF mode and enter the Sleep Mode if no pedaling cadence greater than 20 RPM is detected after 10 minutes.
To enable or disable Auto Pause, see Auto Pause settings.
