Indoor Console - Stages SIC1 Console User Guide

Bike Numbers

To communicate properly, a paired console and sensor must be mounted to the same exercise bike.

To make sure that the correct console stays with the correct sensor and exercise bike, you can assign an identification number to the console that matches the identification number of the exercise bike. Due to this, it is strongly recommended that each exercise bike in a fitness club be numbered for easy identification. If there is a communication problem between the console and the sensor, you can view the bike number and make sure that the console is attached to the correct exercise bike.

To view the Bike Number: Press and hold the STAGE and AVG/END buttons. The bike number assigned to the console will appear in the message banner for as long as the buttons are held.