Indoor Power Meter - Stages Indoor Power Meter Gen. 2 User Guide

Battery Installation

  1. Turn the battery door screw to the left to loosen.

    Philips screwdriver with a dotted line running through a blue arrow spiraling counterclockwise to line up with the battery door screw.
     

  2. Open the battery door and insert taped batteries (see Battery Preparation).

    Taped batteries and a blue arrow pointing inside the power meter battery case with the lid (dark grey) and an arrow pointing down and away.
     

  3. Close the battery door.

    Power meter with the lid of the battery case moving up and inward to close.

     

  4. Tighten the battery door screw.

    A Phillips screwdriver with a dotted line running through a blue arrow spiraling clockwise to line up with a light grey screw on the battery door of the power meter.

SEARCH RESULTS FOR:

"term"