Troubleshooting
If power (watts) or cadence (RPM) signal is not being received by your compatible display unit when riding the bike, please confirm the following items:
- Confirm that working AA batteries are properly installed in the power meter according to Battery Installation steps.
- Ride the bike with a pedaling cadence of greater than 20 RPM. The power meter will not send cadence or wattage when being turned by hand; once normal pedaling forces are applied, the device will begin broadcasting power and cadence.
- Ensure that the power meter has been successfully paired to the display unit according to the manufacturer’s specific instructions (see Pairing the Power Meter).
- Connect to the Stages Power app to confirm the power meter is powered on and functional.
Additional support content is available on the Stages Indoor Cycling website: support.stagesindoorcycling.com.
