SC1 Bike - Stages SC1 Online User Guide

Step 4: Install stem stop bolt & replace nose cap

Equipment required

  • 5 mm hex wrench
  • 3 mm hex wrench
  1. Reinstall the handlebar stem screw into the handlebar stem through the hole in the frame using a 5 mm hex wrench.
  2. Slide nose cap back in place.
  3. Reinstall the screws on both sides of the nose cap and tighten with a 3 mm hex wrench.

Side view of front of bike showing handlebar stem screw secured, and nose cap replaced over it and secured.