SC1 Bike - Stages SC1 Online User Guide

Step 6: Install pedals

Equipment required

  • #8 (Pedals)
  • 17 mm pedal or open-end wrench

Warning icon. WARNING: Pedals must be installed correctly on the corresponding crankarm to ensure safety. The user-right pedal is regular-threaded and the user-left pedal is reverse-threaded.

  1. Thread each pedal (#8) by hand as far as possible to avoid cross-threading.
  2. Finish by tightening the pedals very firmly (42 N⋅m) using a 15 mm pedal or open-end wrench.

Left pedal threaded counterclockwise and right pedal threaded clockwise onto the bicycle cranks.