Tools Required

Tools required for unboxing and assembly:

• Box knife (1.)
• Diagonal cutters (2.)
• 3 mm hex wrench
• 5 mm hex wrench
• 6 mm hex wrench
• 14 mm combination wrench
• 17 mm combination wrench
• 15 mm pedal wrench
• Phillips head screwdriver #2
• 2.5 mm hex wrench*
• 8 mm hex wrench*
• Phillips head screwdriver #0*

A torque wrench (with the corresponding hex bits) is recommended for use during assembly, with corresponding torque values given throughout the assembly steps.

*Only needed for optional accessories.