SC2 Bike - Stages SC2 Online User Guide

Handlebar height adjustment

For SC2.20 models:

Rotate the adjustment knob to the left (counterclockwise) to loosen, then pull it out and lift the saddle to desired height. Release the knob and ensure the pop pin engages with the seat post, then rotate the knob to the right (clockwise) to lock it in place.

The adjustment knob is located on the front of the bike.       Adjustment knob turns clockwise to lock into position.

For SC2.18 and older models:

Pull the Fitloc lever outward, then lift the handlebars to desired height. Release the Fitloc back into its neutral position, then lock into place by pushing the Fitloc lever inward.

The Fitloc lever is located on the front of the bike.

If the Fitloc lever is not able to lock into place, or is still loose after locking into place, see Fitloc adjustment.