SC3 Bike - Stages SC3 Online User Guide

Step 5: Install pedals

 WARNING: Pedals must be installed correctly on the corresponding crankarm to ensure safety. The user-right pedal is regular-threaded and the user-left pedal is reverse-threaded.

  1. Thread each pedal (#7) by hand as far as possible to avoid cross-threading.
  2. Finish by tightening the pedals very firmly (42 N⋅m) using a 15 mm pedal or open-end wrench.

Side view of bike with seat post cut away, dotted lines connect corresponding pedals and cranks. Pedal wrenches between each set with a counterclockwise directional arrow on the left and clockwise directional arrow on the right.