Tools Required

Tools required for unboxing and assembly:

• Box knife (1.)
• Diagonal cutters (2.)
• Phillips head screwdriver #0
• Phillips head screwdriver #2
• 3 mm hex wrench
• 4 mm hex wrench*
• 5 mm hex wrench
• 6 mm hex wrench
• 8 mm hex wrench
• 14 mm combination wrench
• 17 mm combination wrench
• 15 mm pedal wrench

A torque wrench (with the corresponding hex bits) is recommended for use during assembly, with corresponding torque values given throughout the assembly steps.

*4 mm hex wrench required for SC3.18 model bikes and older.