Stages Solo & Les Mills Virtual Bike - Stages Solo / Les Mills Virtual Bike User Guide

Step 10: Insert the tablet arm into the head tube

Carefully route the tablet arm assembly (#15) over the gas cylinder and through the head tube.

    1. Rotate the knob counterclockwise to loosen, then pull the knob outward.
    2. While pulling the knob outwards, push the tablet arm assembly down into the head tube and release the knob to allow the pop pin to lock it in place.

NOTE: Pushing the tablet arm assembly down against the lift assist cylinder requires some force.

Loosen the knob (A) and lower the tablet arm assembly into place (B)

SEARCH RESULTS FOR:

"term"