SC2 Bike - Stages SC2 Online User Guide

Tools Required

Tools required, as listed below.

Tools required for unboxing and assembly:

  • Box knife (1.)
  • Diagonal cutters (2.)
  • Phillips head screwdriver #2 (3.)
  • 3 mm hex
  • 5 mm hex
  • 6 mm hex
  • 14 mm open-ended wrench
  • 17 mm open-ended wrench
  • 15 mm pedal wrench
  • 2.5 mm hex*
  • 8 mm hex*
  • Phillips head screwdriver #0*

A torque wrench (with the corresponding hex bits) is recommended for use during assembly, with corresponding torque values given throughout the assembly steps.

*Only needed for optional accessories.

SEARCH RESULTS FOR:

"term"