Stages Solo & Les Mills Virtual Bike - Stages Solo / Les Mills Virtual Bike User Guide

Steps 11-12: Extend and connect the cables

Equipment Required

  • #16 (Zip tie)
  • Diagonal cutters

Step 11: Pull the coiled cable from the bottom of the stem:

  1. Extend the coiled cable.
  2. Use the zip tie (#16) to secure 3 or 4 cable coils below the zip tie.
  3. Carefully clip off the excess zip tie using the diagonal cutters.

Pull the coiled cable down and secure to rod at the bottom of the head tube

Step 12: Connect the coiled cable to the cable from the bike leg.

Connect the two cables